Showing posts with label PEEK. Show all posts
Showing posts with label PEEK. Show all posts

Tuesday, December 17, 2019

PEEK Components and Bearings - Durable, lightweight, and dependable

Developing a new polymer is challenging and needs to take into account what end applications are being catered to. Often, specific polymers will be identified for a certain application, but their limitations would be highlighted. Working off these limitations, a new material can be developed that seeks to fill gaps in performance. Selecting the best material is a critical step in the development of a polymer and this selection process will determine the quality of the final product. Strength, durability, malleability and many other factors are considered when a material is being selected and each of these factors holds a significant importance. 
The development of PEEK, however, was surprising because suddenly, we had one polymer that exhibited properties at the far end of nearly every parameter. Whether we talk of tensile strength, strength-to-weight ratio, wear resistance, machinability or temperature resistance, PEEK truly checks all the boxes and leaves little doubt as to its effectiveness any time a debate on material selection is had.
Suffice to say, that the invention of PEEK revolutionized the plastic component manufacturing industry
PEEK was invented in the UK in 1978 and received a US patent in 1982. The processing conditions implemented to mould the material influence its crystallinity, or structure, and this results in the superb mechanical and chemical resistance properties of PEEK. PEEK is also highly resistant to degradation under high temperatures and resilient in organic and aqueous conditions. These properties make PEEK ideal for a wide array of components in diverse industries. Some of the major fields where this dynamic plastic material has been most effective are aerospace, the medical space, food & beverage and also the manufacture of PEEK plastic bearings.

PEEK in aerospace components

PEEK is optimal in aerospace due to its lightweight properties (it has a specific gravity that is half of aluminium), chemical inertness and toughness. Light-weight materials reduce the overall load of a vessel and, thus, reduce fuel costs and helps preserve the environment. Because PEEK is a chemically inert, the material is stable in extreme conditions and can withstand exposure to atmospheric particles. The fact that PEEK can be machined to the kind of close tolerances needed in aerospace make it an ideal material of choice.

PEEK in medical equipment

In the medical field, hygiene, durability and biocompatibility are all important factors when considering what materials to incorporate. PEEK offers flexible and durable properties and it also has no adverse effects on the skin or internal organs, which makes it an ideal material for implants. Biocompatible grades of PEEK can be used as sensor covers and transducers in medical equipment. Such grades ensure that even in the event of bodily contact, there would no adverse effects. Its resistance to extreme temperatures and low moisture absorption properties also make it a preferred choice for pumping mechanisms.

PEEK in food and beverages

The high-temperature resistance of PEEK makes it a favourable option in the production of powders and other ingredients in the food & beverage industry. PEEK is an effective alternative to PET and holds up well under the extreme temperatures for the drying of ingredients in food as well as feed for animals. The high wear resistance of PEEK also makes it an ideal choice for scrappers, where other polymers would either chip or deform. PEEK valves are also critical in coffee machines, where metallic valves have been known to impart an unfamiliar taste to the beverage. Since the last 5-10 years, high-end coffee machines around the world use PEEK valves in their equipment.

PEEK as a bearing material

One field that has some of the most diverse applications of PEEK is the manufacturing PEEK bearings. PEEK makes an ideal material for bearings for many reasons. PEEK bearings can be made self-lubricating (usually with the addition of PTFE at a concentration of 15-25%). Abrasion causes microscopic bits to function as lubrication with inconsequential alteration to the bearings themselves. The durability and high-temperature resistance of PEEK bearings allows them to be thinner and lighter than traditional material bearings. Their light-weight characteristics make them more fuel-efficient and they don’t require the constant grease and maintenance that metallic bearings demand. As a result, PEEK can reduce bearing production and maintenance costs significantly. PEEK bearings can also run for long periods of time without freezing during operation. The low thermal expansion coefficient of PEEK ensures that it retains dimensional integrity over a very wide range of temperatures – both high and low. The chemical resistance of PEEK bearings allows them to withstand conditions that would otherwise cause damage to metal bearings. All these attributes make PEEK bearings an exceptional mechanical component for an endless number of products and functions
As we can see from these examples, PEEK is effective in a range of industries and PEEK bearings have become a favoured option as a mechanical component. PEEK bearings can be found in many different types of products and even in motors that go into the refrigerators and air conditioners in our homes. PEEK bearings will continue to be implemented in more and more products in the future as well. Keep your eyes open for PEEK plastic materials and PEEK bearings in the machines and products around you.

Wednesday, April 29, 2015

A Comparison of Dimensional Stability Among High-Temperature Polymers

In the world of engineering polymers, plastics capable of withstanding temperatures above 150°C come at a price. While Polyamides, POM (Delrin®), and PVDF (Kynar®) are all well suited to temperatures within this barrier, when we look beyond we find the options become rather expensive.
Polymers that can accommodate higher temperatures, such as PTFE, PEEK and Polyimides tend to be in the range of 3x-20x the price of lesser plastics. As a result, the cost implications of designing a system using high-temperature polymers are significant.
What do we mean by high-temperature polymer?
While the phrase seems fairly self-explanatory, high-temperature polymers need to be further evaluated to understand exactly how they behave. Usually, an OEM or product designer will look for the continuous service temperature to assure themselves that a part made using the polymer can withstand the conditions it will be subjected to.
PolymerCommon Brand NameGlass Transition Temperature (°C)Continuous Service Temperature (°C)Melting Point (°C)
PTFETeflon®-20260375
PEEKVictrex®/Ketaspire®150250340
Polyimide (PI)Kapton®400450NA
Polyetherimide (PEI)Ultem®220185250
Polysulfone (PSU)Udel®190170350
Polyphenylsulfone (PPSU)Radel®220180370
However, for the component manufacturer, the service temperature is less relevant than the melting point and the glass transition temperature of the material. This is because these are the temperatures that directly impact the production of the component – both in molding as well as machining. We will be focusing here on glass transition temperatures and trying to understand how this metric needs to be used in component design and manufacture.
What is glass transition?
Put simply, a material moves from crystalline to amorphous states beyond its glass transition temperature. All polymers, when in a crystalline state, have internal stresses that keep it dimensionally stable. These stresses are a culmination of the inherent molecular arrangement of the molded shape and further stresses lent to it during the machining stage. Heating the part above the glass transition point causes the molecules to realign, thereby relieving the stresses and causing dimensional changes to the part. As stress due to machining can be significant, most polymers are subjected to an annealing cycle prior to machining, to ensure that the stress build up does not cause the part to crack during the process. Polymers such as PEEK will crack under so little as a simple turning operation of not annealed beforehand.
The stresses are very relevant for machined components, as it ensures that machined parts subjected to temperatures within their glass transition point will not deviate dimensionally. However, it is equally true that in the event of higher temperatures, the deviation may result in part failure. This is typically the case for highly machined components.
Consideration for Dimensional Stability
Our experience with dimensional stability rests around the use of PTFE and PEEK. Both polymers behave very differently both during machining and after. We shall look at them one by one.
PTFE
Among high temperature polymers, PTFE is unique in that it has a glass transition temperature under 0°C. The implication of this is that PTFE is generally amorphous even at room temperature and therefore does not suffer the internal stresses that other polymers do. As a result, PTFE typically does not require annealing, although it is still done as a means to improve the hardness of the material. No internal stresses mean that the material undergoes minimal duress during machining and any cracking of the machined part is avoided.
The flip side of this property is that PTFE has a very weak dimensional stability when subject to applications where a high range in temperatures may be present. While PTFE can easily withstand high temperatures, close tolerances would need to be abandoned when subjecting it to these conditions as the material itself experiences an up to 3% deviation in linear dimensions between 0 and 100°C.
So although PTFE is capable of surviving the harshest of environments, a PTFE part machined with close tolerances is usually employed only in areas where the temperature, while high, must remain range bound within +/-15°C.
PEEK
In contrast to PTFE, achieving close dimensional tolerances in PEEK and difficult due to the constant build up of stress during machining. In our own experience, PEEK parts may sometimes need to be annealed multiple times to ensure that after each stage of machining, the internal stresses are adequately relieved so that the part does not crack/deform after the next stage.
Unlike PTFE, which constantly gives off heat as it is applied to it, PEEK needs external help in cooling it down. As a result, the use of a coolant is common in PEEK machining and helps reduce the extent of stress induced in the part.
Finally, while close tolerances of up to +/-0.01mm have been achieved on PEEK parts, there is no guarantee these tolerances will be retained should the part be subjected to a temperature above its glass transition point during application. In such an event, stresses induced during the final operation of machining will relieve themselves and cause the molecules within the PEEK material to realign slightly, causing dimensional deviations in the part.
So given the above hazards, why are PTFE and PEEK still so widely used? One reason is that there exist very few applications where strict dimensional stability in temperatures above 200°C are a co-requisite. Hence, we have applications of high temperature where the dimensional tolerances tend to be very lax and we have applications with tight machining tolerances, where the part may experience a maximum temperature of only 150-160°C.

Wednesday, August 6, 2014

PEEK Seals – Numerous Applications, Many Choices

As a polymer, PEEK is most often compared with PTFE. The two have multiple similarities including good temperature resistance, chemical inertness and dielectric strength. When it comes to pure physical strength however, PEEK moves ahead on two counts.
First – the absolute strength of the material is much higher. With a higher tensile strength and hardness, PEEK is preferred to PTFE in applications where dimensional stability over prolonged physical strain is required. Although PTFE does have fillers, such as glass and carbon, which allow for increased stiffness, it still does not compare with PEEK on this metric.
Second – PEEK has a lower specific gravity (1.35 against 2.25 for PTFE). As a result, in applications where the overall weight of the assembly needs to be minimized, PEEK emerges a winner.
One such application where PEEK is highly sought after is in the seals industry. Seals themselves include a huge range of polymers, elastomers and metals, each of which rely on the specific characteristics of the material being used to achieve effectiveness in its application.
Types of PEEK seals
Piston Ring Seals
Piston rings are used primarily to aid wear absorption on the outer diameter of the piston shaft. PEEK is hard enough to withstand the extensive wear induced within the piston, but not hard enough to damage the metal components themselves. The rings are usually machined from a PEEK bush and have different types of cuts, which aid in installation and performance.
Ball Valve Seats
Ball valve seats show a predominant preference for PTFE, as they require a soft material that yields easily to the shape of the ball valve. However, there are a significant number of PEEK seats being used in high-performance valves, where both the PTFE and the metal are machined to ensure a proper fit. Typically, we see these being used in valves employed on oil-rigs or power plants, where the high temperatures indicate a requirement for a polymer slightly tougher than PTFE.
Rotary Shaft Seals
We have developed compounded grades of PTFE with PEEK to cater to the rotary shaft seals market. The combination of PTFE and PEEK is a powerful one. The PTFE provides a boost to the self-lubrication properties, while the PEEK adds strength. Although they work well together, specific applications do call for pure PEEK. The purpose is similar to that of the piston ring, except here the shaft moves radially. PEEK again serves the purpose of being able to withstand wear at high RPMs, while being soft enough not to damage the metal in the event of misalignment or seal failure.
Ball and Butterfly Valve Seats
A number of different materials are used in this application, including PTFE, Delrin and UHMWPE. PEEK finds acceptance specifically in applications with high pressures and temperatures. Butterfly valves are an integral part of any fluid regulatory system, including hydroelectric power plants, oil and gas refineries and shipping.
Manufacturing process
PEEK seals and seats are made primarily via machining. It is possible to injection mould the components directly, but this involves extensive tooling. Furthermore, the precision needed on the part’s dimensions would dictate the need for further machining. Hence, unless the volumes are vast, it is most likely machined from a bush.
The bush itself may be either extruded or compression moulded. Extrusion offers higher productivity and longer length parts, but is again dependent on the correct type of tooling being available. Compression moulding is cost effective and allows the dies to be modified easily, so that the moulded part is made with minimal excess material (a very key criterion when dealing with an expensive material like PEEK). The issue with compression moulding is that it is a slow process with very limited productivity.
So looking at the trade-off between productivity and tooling cost, an OEM can accordingly decide which method to adopt, depending on the volumes.
Variants in PEEK
While most specifications call for pure, virgin (unfilled) PEEK, there are requirements for filled variants also. Most commonly, PEEK is used with a 30% Glass or Carbon filler to aid properties such as creep, dimensional stability and flexural strength.
As mentioned above, PEEK also does well with PTFE. More specifically, compression moulding best-practices sometimes recommend the addition of 5% PTFE into the PEEK mould, as this allows for better self lubrication of the material, while letting it maintain its superior strength.
Another polymer well suited to blending with PEEK is Polyimide. Although the blend is not nearly as proven as the regular filled variants, initial studies show that the addition of Polyimide allows PEEK to maintain its flexural modulus over a much high temperature range as against unfilled PEEK.
It is difficult to combine too many other polymers with PEEK, simply because the temperatures needed to process PEEK far exceed the melting points of most of these polymers.
A word on PEK
PEK or PAEK has recently emerged as a competitor to PEEK. Industry experts have observed that while PEK does match PEEK on most metrics, it’s long-term effectiveness in maintaining its properties is still being tested.
We recently received a failed seal from an OEM, asking us to analyse whether it was PEEK. After testing it in a lab, it was found that the part was made using PEK. The end-user claimed that the part had only survived a few months in his valve assembly, before failing. This may have been a one-off incident, or could also point to the improper processing of the PEK part. However, it is useful to keep in mind.
Conclusion
PEEK is well known as a versatile polymer. Seals and seats are one more application where this material finds application. The product, however, requires precise dimensional tolerances that not all processors are able to offer. In addition to this, the availability of variants both within PEEK and amongst competing polymers makes the choice of material an exercise that the OEM must take very seriously, before committing one way or another.

Tuesday, November 19, 2013

PTFE vs PEEK – A Comparison of Properties

Although both PTFE and PEEK are well established within their respective fields, there are frequently questions around which would better suit a given application. OEMs typically have to make a choice based on technical suitability and hence need to be better informed as to how these materials match up against each other.
Below is a short comparison on properties between these two polymers and can be used a guide to aid new product development.
ParameterPTFEPEEKPreferred material
PriceModerately expensiveVery expensivePTFE
Tensile Strength25-35 Mpa90-100 MpaPEEK
Elongation350-400%30-40%PTFE
Compressive Strength30-40 Mpa140 MpaPEEK
Flexural Modulus495 Mpa3900 MpaPEEK
Coefficient of Friction0.03-0.050.35-0.45PTFE
Temperature resistanceUp to 250°CUp to 250°CNA
Dielectric strength50-150 Kv/mm50 Kv/mmPTFE
Chemical resistanceVirtually inertAffected by Sulphuric acidPTFE
Coefficient of linear thermal expansion14 x 10-5/K5 x 10-5/KPEEK
Machine-abilityGoodVery goodPEEK
In a nutshell, applications requiring strength and low levels of deformation would usually employ PEEK, whereas those requiring resistance to voltage or chemicals utilize PTFE.PTFE also rates highly in that it is self-lubricating. This makes it a preferred choice in high wear applications.
The biggest disadvantage of PEEK remains the price. It is roughly 10 times the price of PTFE and as a result has remained a niche polymer, used only in applications where it is absolutely necessary.

Wednesday, March 20, 2013

PEEK in India – A Growing Market with Many Challenges


At Poly Fluoro Ltd. we started our journey with PTFE and gradually expanded into other polymers. Initially, this was at the behest of existing customers, but over time our expertise in machining plastics meant that we were comfortable offering a variety of options to our clients, rather than try and force fit PTFE into their application.
We discovered the benefits of PEEK in one such exercise. Although we have already blogged extensively on the benefits and properties of PEEK, our own experience in dealing with this material serves to explain much of the commercial and technical queries surrounding this material.
PEEK in India is a small market in terms of volumes. The total consumption is only about 35 Tonnes. Of this, most of the material is imported as semi-finished rods and sheet, with only 12-15 Tonnes being processed from resin indigenously. Small as these numbers are, keep in mind that semi-finished PEEK sells at anywhere between US$275-US$400 per Kg – so in value terms, the market is not as small as the volumes suggest. Nonetheless, it is very much a niche market – even among speciality polymers.
Being present in the PEEK market as a processor poses many challenges. Some of these are technical in nature, while others relate to the commercial issue (PEEK is very expensive) and how clients respond to PEEK. Again, we have touched on some of these points in our earlier article – but as we have delved deeper into PEEK processing, many new findings have arisen.
Compression moulding PEEK not a simple affair
There are many challenges in compression moulding PEEK and most of these do not get explicitly highlighted in manuals and guidebooks. In most manuals, the process is outlined in 5-6 basic steps, which at first glance make PEEK appear a very friendly material to deal with.
In reality, the process is time-consuming, highly sensitive to the exact process needed and very specific in the type of tooling required.
The benefit of compression moulding PEEK over, say extrusion is that we are able to make customized dimensions based on the customer drawings. The stock piece for a part measuring 70mm in diameter can be moulded as 72mm, rather than using a 75mm rod. Over a 50mm length, this saves almost 25 Grams per part – which is significant when we consider the cost per Kg. Furthermore, if the part has an internal diameter the saving is even more, as the same cannot be attained in extrusion for large diameters.
However, against this saving, the time consumed to make a 50mm part would be many times what extrusion would take. Compression moulding is known for low productivity and even a large processor is only able to consume 20-25 Kgs per day of production. In India, however, where labour is inexpensive, this is not a huge cost factor – it only limits volumes. And since PEEK is still a low volume polymer – even processing 4-5 Kgs a day can be significant.
The actual process of compression moulding PEEK is also not straightforward. The 5-6 steps mentioned in the manuals each contain nuances that need to be fine tuned until you reach a process that most suits the equipment available. In our own experience, we have found that over 25-30 trials had to be taken, each using up between 250-800 Grams of resin. After each trial, some parameters were changed before taking another trial. Parameters such as pressure, peak temperature and soak time all need to be varied to control issue such as porosity, cracking, black spots and cold spots.
In addition to this, the selection of dies is critical. PEEK, in its molten form can be a very aggressive material and we have had many steel dies get corroded during moulding. Again – finding a balance between a strong die metal and the correct process is critical in obtaining a final process that is both economical and productive and which yields a high quality final product.
Variants and substitutes do exist for the price conscious
We have had some success in blending PTFE with PEEK ratios of 5%, 10% and 15% by weight (ie: PTFE+5/10/15% PEEK). Again – the process of blending is not straightforward and the PTFE itself needs to be processed slightly differently owing to the fact that PEEK melts at a higher temperature than PTFE. However, the final blend has proven to be useful in applications involving sealing and needing high wear resistance, with a low coefficient of friction.
Another alternative to PEEK is PEK. PEK is very similar to PEEK and is processed in much the same way. As far as properties go, some have even suggested it is slightly superior on some parameters. Commercially, it is roughly half the price of PEEK – which makes it a very tempting alternative. However, PEK is still being proven in OEM applications, whereas PEEK has been around long enough to give any OEM designer confidence in its properties.
Marketing PEEK is a challenge
In a market like India – which is highly price sensitive – PEEK is a difficult product to win customers over with.
PEEK is usually the last choice of any OEM due to its price, and if someone has not come across the material before, it takes some educating before they are convinced that any polymer exists at such a price. And while PEEK is well established in the West – in India, it is still very nascent in comparison and clients do not always see the long-term benefits of using it.
Furthermore, the relatively recent introduction of PEK into India is threatening to take some of the long-term market share from PEEK, as in a price sensitive market, people may be willing to make the gamble on a cheaper substitute.

Tuesday, May 8, 2012

PEEK: The Superman of Polymers


We have shifted to www.polyfluoroltd.com/blog - do follow us there

If you deal in polymers and have not come across PEEK – it’s probably because its one of those materials which does not surface unless really needed. When it is needed – there’s little else that can be used in it’s place and this often confuses OEMs; because even among expensive, high-end engineering polymers PEEK sits at a price point that causes the client no small amount of shock.

It is important to talk about the price of PEEK before all it’s other characteristics, as this is usually the first thing the client want to discuss. Invariably, they come knowing that they need this polymer (PEEK), but knowing little else. They expect the price to be similar to Polyacetal or, at the very worst PTFE. When they find out that it is close to 10 times the price of PTFE, it comes as a huge surprise.

Why PEEK is expensive is not fully known. Perhaps it is because it has not yet reached the global scale of manufacture of more commoditized polymers, or perhaps the technology is so unique that it allows resin suppliers to charge a huge premium – knowing that alternatives are not available. As processors, we know only so much:

  • The resin is 5-8 times more expensive than PTFE
  • Processing PEEK is time consuming and expensive in comparison to PTFE
  • Machining PEEK is tricky in comparison to other polymers


Since the resin prices are not in our control, we would like to look at points 2 and 3 and discuss them in more depth. But first, let’s get a better idea of what PEEK offers.

High tensile strength

In the polymer space, it would be tough to find something tougher than PEEK. It is so strong, in fact, that machining guidelines for PEEK need to follow the same as those for metals.

This strength allows PEEK to be used in applications such as gasketing and auto components – especially where metals cannot be used, but a metal-like durability is required

High temperature resistance

PEEK melts at about 400 Degrees Celsius and is capable of running in environments of 300-325 Degrees without deforming. While PTFE can withstand up to 250 Degrees, any pressure/ load on PTFE at this temperature will invariably cause deformation. In the case of PEEK, its hardness allows it to be in a high-load-high-temperature environment without loss of dimensional properties.

High wear resistance

Again, while both PTFE and UHMWPE can take a significant amount of wear, PEEK exhibits a high PV value and can withstand wear effects even under harsh physical and chemical conditions.

Chemical resistance

While not on the same level as PTFE for pure chemical inertness, PEEK exhibits resistance to many harsh chemicals, allowing it to be used in corrosive environments, under heavy loads


In a nutshell, PEEK’s ability to stay dimensionally stable under harsh environments makes it a highly sought after polymer. OEMs who use PEEK do so knowing well that for the properties offered, PEEK is unique and therefore expensive.

Processing PEEK

We will not delve very deep into the processing of PEEK (as this is a proprietary process unique to each processor), but we will point out the key differences between PEEK and PTFE processing (which has been looked at earlier). It should be noted that here we are referring only to compression moulding, and not injection moulding.

The main difference is that while PTFE is cold compression moulded and then loaded in batches into a sintering oven, PEEK needs to be sintered during compression itself.  Furthermore, post sintering, PEEK needs to go through an annealing process, which is time consuming. This leads to a few complications:

  • Batch processing is difficult. Since the total heating cycle for a single piece can take up to 8 hours, and since heaters are expensive, PEEK is normally moulded a few pieces at a time. So unlike PTFE, where a batch of 8-10 large pieces can be moulded in series and then put in the oven for a single cycle, PEEK will offer only a few pieces in the same amount of time
  • Since PEEK is heated under pressure, issues of flash can arise as the resin becomes molten, but has pressure being applied on it. Furthermore, the pressure and temperature have to be balanced very carefully, since the temperature makes the PEEK molten, allowing it to reach its desired shape, but the pressure is responsible for vacating air bubbles from the material, so that there is no porosity.
  • Batch processing the PEEK parts for annealing is possible, but takes about 24 hours


So overall, the productivity in moulding PEEK is far below that of PTFE. This does answer, in part, the question of why the price of the finished material is so expensive.

Machining PEEK

As discussed above PEEK machines more like a metal than like a polymer. It is hard and has a significant impact on the tool. The same tool that might churn out 3000-4000 PTFE parts may struggle to churn out a few hundred PEEK parts. Again – this adds to the cost of the finished product significantly.

More importantly for machining though is that if the PEEK is not annealed properly, the part will behave erratically during machining as different areas within the material react differently to the stress being placed by the tool. Thus, cracks can develop during machining and the dimensional stability across a batch of components can vary significantly.

As a result, PEEK machining is a difficult process and there are few who are willing to take on the risks of machining such an expensive item, knowing that the rate of rejection could be very high.

In conclusion – PEEK has remained a largely niche polymer mainly due to its prohibitively high price. If it were cheaper – say around the price of PTFE – there are chances that it could steal a significant chunk of the PTFE market. PTFE still rates much higher than PEEK on characteristics like coefficient of friction and dielectric strength, but where it is a question of sheer strength, PEEK stands unmatched amongst polymers.