Showing posts with label price trends. Show all posts
Showing posts with label price trends. Show all posts

Tuesday, May 8, 2018

PTFE Pricing Update – The Impact of Anti-dumping Duties

For anyone connected to the PTFE industry, the last 18 months have been fraught with anxiety. The shutting down of a few PTFE resin manufacturers in China in early 2017 caused a supply crunch that has yet to ease out, driving prices up as much as 60%.
Many believed that the imbalance between demand and supply of PTFE raw materials would spur a capacity expansion from those manufacturers still operational. However – as we earlier saw in 2011 – resin manufacturers opted instead to maintain capacity and allow prices to increase. From the point of view of companies like Gujarat Fluorochemicals (India) and Shangdong Dongyue (China), this appears to be a sensible strategy. Until early 2017, the price of PTFE resins had been steadily declining due to fierce competition between resin suppliers. The shutting down of Chinese plants would have come as a blessing for these companies, who have since seen their realizations increase.

But while a rational observer may argue that an upward price correction was certainly due in early 2017, pinpointing the “fair” price for PTFE has always been tricky. Not only is the PTFE industry minuscule in comparison to more familiar polymers such as PVC, Polypropylene and Polyethylene, but its irreplaceable properties as an engineering plastic allows resin manufacturers a lot of leeway to test the extent to which higher prices would be accommodated by processors such as ourselves. Considering the price increase has been a worldwide phenomenon, it has not been impossible to convince clients regarding the upward revision of rates. What has been taxing, is the instability. A client may be willing to revise rates once or twice, but when it becomes a monthly affair, one can expect some backlash.

Amid all the uncertainty, it appears processors may have found some solace in the protectionist tendencies of the current US government. When the US announced in October 2017 that they would be reviewing the anti-dumping policy in relation to PTFE resin supplies, no one took much notice. This administration has highlighted multiple instances where the competitiveness of the US economy was threatened by low-cost-countries. We never believed that much attention would be paid to a niche industry like PTFE.

Over the past week, however, tariffs of 69% to 208% were announced on Chinese manufacturers, while Gujarat Fluorochemicals (India’s only manufacturer) was slapped with an 18.5% anti-dumping duty. The resulting impact of this measure is something we would like to extrapolate.
  1. Demand realignment

    The first and most obvious effect of a tariff such as this is to curb demand from the US for Indian and Chinese resins. Globally, North America is said to contribute to about 25% of PTFE demand, with the bulk of this coming from the US.
    Our understanding of the price of Chemours resins (the erstwhile DuPont and the company that has lobbied to get the anti-dumping duties imposed) is that they lie between 1.25-1.6 times the price of resins from India. Hence, even with freight and other duties, Indian suppliers may still find some takers in the US market. It should however be noted that given the superior quality of Chemours’ material, processors cannot be expected to choose Indian resins, should the price differential be small.
    With regards to China, the pricing is a little more opaque. There are several manufacturers, and each has their own rate contracts with their respective clients. Whether a 208% tariff is warranted or is merely the result of effective lobbying on the part of Chemours, we cannot really tell.
    In a twist of undeniable irony, Russian manufacturers have been omitted from this tariff. When Gujarat Fluorochemicals successfully lobbied for anti-dumping duties into India, they made it a point to include both China and Russia in their report. The absence of Russia from the US’ anti-dumping measures means that they are well poised to benefit from the demand shift – assuming the US does not penalize them with any other general trade tariffs.
  2. Supply realignment

    Considering what a large share of the world’s demand the US commands, their focus inward will leave a lot of Indian and Chinese resin manufacturers in the cold. The move is likely to cause the capacities of Asian firms to come in line (if not even exceed) local demand. There is still a significant amount of demand within Asia Pacific – which accounts for more than 50% of the global market. However, the price points are lower and the fact that the US has practically shut its doors mean that competition will drive prices down again.
    This may be particularly harsh for Indian resin manufacturers, as Chinese resins – which have been hard to come by locally due to the supply crunch – will undoubtedly flood the market. Interestingly, the anti-dumping duty on Russian resins into India has expired recently, implying that here too, they have a good opportunity to enter the market.
  3. Value realignment

    When India imposed anti-dumping duties on China and Russia back in 2010-2011, the effect was not as beneficial to Indian resin manufacturers as initially assumed. This was because processors shifted their demand from buying raw materials from China to buy semi-finished goods. Traders who were earlier importing resins, now began dealing in rods and sheets.
    It is therefore equally likely that in the US too, the market will shift such that semi-finished and finished components get imported, rather than resins. Ultimately, the US has a significant appetite, and this needs to be met one way or another. One cannot imagine a processor in the US agreeing to pay a 200% duty, when they can just as well import finished products with no such penalty.
    It should also be noted that while Chemours may certainly want to monopolize the North American market as it once did, it simply may not have the capacity to satisfy the local demand. As a result, shortages will push clients to look further up the value chain for their requirements. In protecting the interest of a few large companies, the US may have just killed of a large portion of its processing industry, which was no doubt dependent on Indian and Chinese resins for staying competitive.

Tuesday, May 9, 2017

PTFE Pricing – Is volatility making a comeback?


An introduction to PTFE Pricing

Being a niche industry, PTFE doesn’t exactly get a lot of press even when large shock waves surge through it, disrupting the operations of manufacturers and end-users alike.

In 2010-11, the price of virgin PTFE began climbing, after having dipped consistently over the preceding 5 years. What started out as an understandable correction soon turned into an all-out crisis, as the price nearly quintupled over the next 8-10 months.

Imagine that scenario in any other industry. If the steel price to see a 5x increase in less than a year, what horrors would that unleash into the broader market? That the PTFE industry survived is a testament to the incredible properties of the material, that make it so difficult to substitute using other polymers.

To make matters worse, since the industry is small, there was no one to really make sense of the economic factors driving the price increases.

We stepped in at that time, partly driven by our own need to analyse the situation, but also because the information we collected seemed like it would be useful to other industry players.

Many articles were released between 2011 and 2013 that charted the various drivers of PTFE pricing and made sense of the driver that would play out going forward.


Over the past few months, there have been murmurs of a return to the high pricing seen in 2011. Resin suppliers have offered ample warning that a price revision was imminent. So far, this has translated into 2 price corrections to the extent of 10-15% and 8-10% in the months of April and May respectively.

We need to compare this with the escalations seen in 2011-12 and understand that the rise is not quite so sharp. Nonetheless, we also need to compare the cost drivers and ensure that the same pattern is not repeating.

Key Drivers of PTFE Price

Unlike other polymers – such as polythene, polypropylene and polycarbonates, PTFE does not result as a by-product of the oil refining process. This comes as a shock to many, who assume that our fates are tied to oil prices and that we should therefore be benchmarking our final rates accordingly.

PTFE is made from the polymerisation of R22 gas – a refrigerant that finds its use mainly in the air conditioning and refrigerator industries. As a result, PTFE prices are driven by the demand and supply of R22.

When prices started increasing in 2011, the key driver was thought to be Fluorspar – a mineral that is critical to the manufacture of R22. In conjunction with this, a spike in demand from the AC and refrigerator markets in China along with a general crackdown on R22 usage (as it is not an environmentally friendly gas) caused prices to shoot up.

Today, the scenario is slightly different.

For one – we’re over halfway through the summer, so we’re not likely to see any shocks due to AC and refrigerator demand. Furthermore, Fluorspar supply has also regularised. A key effect of the price increase in 2011 was that idle Fluorspar mines in South Africa were reopened, offering an easing of supply to the market that was otherwise dominated by China.

If industry insiders are to be believed, the key driver this time around is environmental. China has been actively seeking to clamp down on R22 usage and has, in the process, shut down two PTFE plants that were not adhering to the standards. It is from here than the supply constraint has originated, driving up PTFE raw material prices within China. Obviously, as the China price is usually the floor price for most goods in the world, this has allowed resin manufacturers around the world to increase rates accordingly.
Where the prices go from here depend on three factors:
  1. Whether the shut-down plants will be coming back on line after making the necessary changes

    It is yet unclear if the plants have been permanently shut down or are only undergoing an overhaul to make them compliant with the environmental codes. If they do come back online within the next 6-8 months, we would see a return to lower prices
  2. Whether the move to phase out R22 will go as scheduled

    R22 is being phased out not only in China, but all over the world. India has also committed to stop using the gas completely by 2032. If this phase out continues, it could result in a supply surplus to the PTFE industry, driving down prices. However, if the use of R22 in PTFE is itself restricted, then it would require a shift to alternatives of R22, which would be

    expensive.Currently, as there is no talk of restricting R22 in PTFE specifically, it is likely that the former would result
  3. Price inelasticity of PTFE

    In 2011, one thing that was made clear was that even at 5x multiples, there was still demand for PTFE resins. This allowed the resin manufacturers to continue increasing prices well above the rates that would have resulted from purely economic factors.
Ultimately, it was due to competition from China that forced prices back to normal levels.
In the short term, it is likely that resin suppliers will again try and test the market to see what levels they can sustain at. With the threat of China temporality removed, it remains to be seen how far they will push the market.
We only have snippets of information at this point to make sense of the situation. Clearly, with PTFE being used in so many fields, this poses some concern to many industries. We will be keeping our ears to the ground to see if anything else come up.

Tuesday, February 5, 2013

Mapping the PTFE Price Increase - An Update


 We have been receiving many mails asking us to map or at least project the PTFE price trend going forward. Since our last post on PTFE pricing was about a year ago (Feb 2012), it is a valid question to ask whether there has been any further volatility in this market and what that implies for prices as a whole.

To lay any suspense to rest right away – we can firmly say that prices have indeed been stable this past year and it is due to this stability that our own interest in analyzing the prices has dimmed somewhat. However, that is not to say that things would continue along this vein indefinitely. PTFE is a complex material and the dynamics involving its manufacture and sale are constantly in flux – meaning that the next shock may just be around the corner at any time. So we would like to look at some of the buzz surrounding the industry in a hope to at least demystify the future to some extent.

Prices are expected to remain stable throughout 2013

This is the general consensus as of now and is due to two primary factors:
  1. There is a general slowdown in global demand (much in line with most other industries) that makes it risky for resin manufactures to experiment with pricing like was done early in the price escalation of 2010-11
  2. There was a significant over supply of resins when prices were high and this led to huge inventories which manufacturers are still offloading


In some areas it is believed that there is still some scope for prices to fall further. However, it is most widely accepted that the current rates are stable and should be for the foreseeable future

China still a key player – but not the only price maker

Back in 2010, it was largely a price war between manufacturers that led to very low PTFE prices. Much of this was driven by China – where the abundance of fluorspar and the support from their government allowed Chinese PTFE manufacturers to scale up very quickly.

Although China remains a key player still, a few factors are affecting their economics and scale right now:
  1. The government support has reduced for PTFE resin manufacturers in China. With the clamping down of R22 within China (for environmental reasons), there is a subsidy of US$0.5 per Kg of R22, which is no longer being offered by the Chinese government.  Owing to this, Chinese manufacturers have had to pass on this cost increase of about US$2 per Kg on to PTFE processors.
  2. Due to quality issues with Chinese resins, many OEMs have started specifying that their parts be made from resins such as DuPont, Daikin or AGC. Many semi-finished PTFE processors have also shifted away from Chinese resins due to the instability of the material. It was long believed that China reserved the good quality resin for their domestic manufacture and preferred to dump the off spec grades into other countries (one of the reasons why the anti-dumping duty on Chinese resins was upheld by the Indian government). This has hit the volumes of Chinese resin manufacturers
  3. Another key issue is repro material. While India earlier had significant imports of Chinese semi-finished PTFE materials, most of this was repro material but was being passed off as 100% pure virgin PTFE in the local market. This high intake of semi-finished PTFE was affecting the local semi-finished manufacturers as well as local resin suppliers. However – owing to the major quality issues with repro and the lack of accountability and transparency in the percentage of repro being incorporated, many companies have had to stop procuring semi-finished PTFE from China and have started buying domestically – where it is easier to monitor quality and also return material if found defective. This has led to a resurgence in domestic PTFE semi-finished goods production and also an increased off-take from local resin manufacturers.


With China on the back foot due to the reasons listed above, it may be safe to say that price manipulation and/or competition is for the time being not a threat – since it is usually with China that most of these issue do arise. Hence, the current view is that of stability – and we should enjoy that while it lasts.

Saturday, December 3, 2011

PTFE Pricing Again – is there another price hike in the offing?

We have shifted to www.polyfluoroltd.com/blog - do follow us there

The adage “Only the paranoid survive” has held very true in the PTFE industry these past 20 odd months. You see, while it is difficult to imagine worst case scenarios and constantly plan along their likelihood, it is usually the only way to make sure that one is not blind-sided by bad news when it does arrive. And since bad news has been arriving thick and fast, being mentally and commercially prepared for the price hikes in PTFE resins are what have allowed many PTFE processors to survive this period of turbulence.

So we choose to re-look at pricing again because despite the fact that PTFE prices have been stable since July 2011, the last thing we can afford to do is assume all will be well from now on and be rudely shocked if and when another price hike does come around.

But rather than subject ourselves to speculation, we have been looking at trends, hearing out rumors and gleaning information from various sources to gauge what might actually be the future of PTFE pricing in the near term. As always, there are various factors at play, but together they do suggest that another price hike is unlikely and that there may even be some easing out of prices in the offing.

1. Rate contracts

Our sources in Europe tell us that there is an increasing push by PTFE resin suppliers to enter into rate contracts for the coming quarter. In an environment where the suppliers have enjoyed increasing prices month-on-month, rate contracts suggest that the scenario may be changing and that an easing out of prices is expected.

Furthermore, many companies are rejecting the rate contracts, since there is a general feeling that prices will reduce in the near term.

2. China and Russia back in the game

In an earlier article we mentioned how both Chinese and Russian resin suppliers were experiencing capacity constraints due to a number of reasons ranging from Fluorspar reallocation to maintenance shutdowns and internal restructuring of capacities.

Now our sources tell us that China and Russia are once again making supplies into Europe and that the pricing is highly competitive in comparison to other suppliers.

Even locally, the marketing push by Chinese companies to try and sell resins into India has accelerated. We receive more mails every day from China and have even been approached by some sourcing agents, asking if we would be interested in entering an agreement to buy resins.

It was always our belief that prices may never come down, since the value growth due to pricing has more than compensated the volume reduction. However, we also know that China has always preferred higher volumes rather than higher margins (a strange strategy, but one that has allowed them to aggressively expand and build scale). So it is unlikely that they will join the rest of the world’s resin suppliers in keeping prices stable and highly probable that they will induce a price war of some sort – forcing prices to reduce.

A quick look at the global price benchmarks we have obtained show that while the rest of the world (India, USA, Europe) had stabilized around a price of US$25-27 per Kg, this rate was sustainable only as long as China and Russia were not supplying globally.



3. Anti-dumping duty no longer effective

When the anti-dumping duty on Chinese and Russian resins was first imposed in India, it effectively increased PTFE resin prices by US$3.3 per Kg. Given the local price of PTFE resins was US$7-8 per Kg at the time, this acted as a serious deterrent for processors buying from China and Russia. At US$20-25 per Kg, the US$3.3 duty ceases to be effective, as the landed cost of the resin would still be below the local rates being availed in India.

It does remain to be seen whether local resin manufacturers are able to bring about a further increase in the duty amount, but even this will take time, so it is likely China and Russia will re-enter India and put pressure on prices.

4. Re-opening of Fluorspar mines

An obvious trend – looking at the past year, may be that China is only able to supply PTFE resins now because there would be an easing out of domestic demand for R22 in refrigeration. We had in an earlier article suggested that in the medium term, as winter approached, there would be an increase in R22 available for PTFE resins and this would ease out prices. However, there is no guarantee that the same pattern would not repeat next year – with supply constraints forcing prices up again.

In the mean time, there are reports that mines in Mexico and South Africa have been re-opened, although it would take at least another 12-18 months for them to be operational. This suggests that prices may again increase during summer 2012 – although if processors stock up on raw materials prior to this, it would not allow the prices to escalate in the same manner as they did in 2011.

Up until last week, the local buzz was that PTFE resin prices were being hiked by up to 30% in January 2012. This has coincided with other news that points to the contrary – rate contracts, China and Russia, capacity expansion. It could be that we have missed out some key information and as a result, our own analysis is wrong. It remains to be seen whether there will be a price hike, but for now we’re staying paranoid – because it seems the safer option currently.

Monday, August 15, 2011

Mapping the PTFE Price Increase

We have shifted to www.polyfluoroltd.com/blog - do follow us there

While much has been said about the causes and implications of the PTFE price escalation, we felt it necessary to go through our archives and chart out the exact extent to which the prices have changed.

The chart below shows the price per Kg in US$ for three standard grades – Virgin PTFE, Glass Filled PTFE (15%) and Bronze Filled PTFE (40%). In addition, we have included a table showing the total and monthly growth in prices.

Needless to day, the growth has been unprecedented. In Virgin PTFE, a nearly 8% increase in prices every month has put the industry in a state where there is no breathing time between processors getting new pricing information and passing on that information to the customers.




Most processors are well aware of the effect this has had on their businesses. The main issue has been convincing customers regarding the price increase and furthermore making them aware that the trend may be expected to continue. In addition to this, there is the impact on repeat business, as clients withhold contracts which would have otherwise spanned their requirements over a full year - since processors are unable to commit to prices for more than a one month horizon.





Monday, August 1, 2011

PTFE pricing revisited – inevitabilities in long term supply and demand

We have shifted to www.polyfluoroltd.com/blog - do follow us there

When we started this blog, our aim was two-fold:

1. To inform and educate readers about PTFE, it’s applications and derived products
2. To serve as a platform for clients and other end-users to understand PTFE better and make informed decisions regarding their applications

However, it seems to have been the articles on pricing which have brought most of our traffic as regardless of how important the applications of PTFE are, it is – understandably – on pricing that most questions currently centre.

We therefore want to look at pricing again, just to see if any new information gleaned over the past couple of months helps us understand the situation any better than we did earlier.

Since our last blog on the impact of Fluorspar on PTFE prices, we have – like all other processors – been praying for stability. We haven’t been praying for a reduction in prices – that would be optimism to the point of pure irrationality. However, if prices could simply stabilize – even for a few months, it would give us some time to re-group, re-assess and possibly resume normal operations.

However, the pricing fluctuations have been coupled with lesser-known events in the background and together, these effects are causing the stabilization process to take much longer than earlier assumed.

We would like to take a look at some of the news floating in the market at present. We can vouch that since these are from rather reliable sources, we are inclined to believe them and therefore base our outlook on their implications:

1) Fluorspar shortage is no longer an issue

A supplier who regularly sources semi-finished PTFE from a Chinese manufacturer told us this anecdote: The supplier approached the manufacturer with the offer to supply R22. The proposed arrangement was that the PTFE manufacturer could then supply the resin manufacturer with R22 (assumed to be in very short supply) and in return procure resin at a discounted price. The supplier was shocked to hear that the resin manufacturer declined – saying that they had ample R22 to meet their production needs. This does lead us to believe that although the Fluorspar story may have started the PTFE price frenzy, it is now not playing as significant a part.

2) European resin manufacturers have re-allocated resources away from PTFE

This was partly confirmed by a representative from DuPont, who stated that their company was slowly coming out of PTFE resin manufacture, as long-term competition against Chinese suppliers was not feasible for them. The resulting effect, we hear, was that most of the European resin manufacturers have sub-contracted their PTFE business to Chinese resin suppliers. Since the realization for PTFE resins in Europe is much higher – the European price has become the new acting price across the global market.

This impact does throw some light on why the PTFE prices have increased so drastically all over the world. On the one hand, we have a supply constraint, as European manufacturers no longer compete in the market. At the same time, you have a huge supply-demand mismatch as European demand for resins stays the same and this drives up prices.

3) Russian suppliers are in a state of flux

From what we have heard, Russia has two main companies who manufacture PTFE resins, one of which acquired the other. The combined company is said to be undergoing some transition issues and management is also contemplating moving away from PTFE and into ETFE. The result has again been to constrain supply, impacting prices in the process.

4) Pricing set to stabilize within the next 2-3 months

Obviously, many are hoping that things will settle down sooner than this, but considering the extent of changes occurring across the market, one might expect that it would take no less than a few months to stabilise.

Our own local the supplier – who increased prices by another 30% in the month of July 2011, assured us that this would be the last-but-one, if not the last, price revision from their side. The current price we are getting is US$26.5 per Kilo for virgin PTFE resin. From what information we have from our European counterparts, it appears that local rates there are around the same price – so it does look like some sort of balance has been reached.

For those thinking about the long term implications of all this, we can infer the following from what data we have already collected:

  1. High prices are here to stay. If there is one thing that all this has shown us, it is that the demand has stayed strong enough despite the price escalation. This has justified the price hike for resin manufacturers from a business standpoint
  2. Long term, quality will improve. Although it looks like Chinese companies will be doing most of the manufacturing of PTFE resins, if they are supplying through companies like DuPont and 3M, the quality controls will most probably be more stringent.
  3. Volumes in PTFE will shrink. Although we have not seen a significant amount of substitution away from PTFE, there are murmurs of new materials and possible replacement materials in some areas. For the most part, we continue to believe that as a material, the extensive spectrum of properties offered by PTFE makes it a difficult material to shift out from. However, we do expect that at least 15-20% of the volumes in PTFE would slowly shift to other polymers such as PA66 and UHMWPE. Nonetheless, we can take comfort in the fact that a 15-20% fall in volumes when combined with a 100-200% increase in prices still implies an overall growth in the industry in value terms.
  4. Repro is here to stay. Not that anyone though that reprocessed PTFE would go away, but we do believe that the acceptance of recycled material in many applications (due to the price implications) would bring about some regularization in the market, with manufactures offering transparency on the extent to which reprocessed PTFE is used and possibly on the properties it could be expected to exhibit. Again - this would be a good thing from a quality standpoint, as buyers of semi-finished PTFE would at least know exactly what they were getting.

To conclude – we have, like most other processors, been trying to make the best out of a situation that has been completely out of our hands. We have faced a rather torrid 15-18 months, so if the end were 2-3 months away, we would look forward to that. In the mean time we would recommend planning one day at a time, because there is no telling what might happen during the next week or month.

Sunday, April 10, 2011

What's the matter with PTFE prices?

We have shifted to www.polyfluoroltd.com/blog - do follow us there

Like most processors and users alike, we too have been asking this question, repeatedly.

When PTFE prices first increased in 2010, it seemed like an inevitable price correction which, if viewed objectively, was understandable. PTFE resin prices had been steadily declining up to early 2010 and only in retrospect do we see how low they actually were. So when the initial hike was announced, it seemed justified and we went about our work gauging the impact it would have on margins and preparing to educate customers as to what we believed would be only a 5-10% price correction for them.

But in the one year following the initial hike, the continued increase in prices has been so steep that for possibly the first time, processors are actually asking themselves if PTFE is a business they should even be in. On the other side of the table, clients are seriously considering whether any alternate to PTFE could be used in their products.

If ever there was a suitable application of the term - a paradigm shift - it is in the PTFE industry post April 2010.

To quantify the extent of the price increase, let's look at some of the prices we were getting for our resins in 2010 and compare with the current rate (April 2011).

1. Virgin PTFE

April 2010 - US$7.25 per Kg (US$3.28 per pound)
April 2011 - US$20.55 per Kg (US$9.35 per pound)

% increase: 185%

2. 15% Glass Filled PTFE

April 2010 - US$12.9 per Kg (US$5.85 per pound)
April 2011 - US$21.1 per Kg (US$9.6 per pound)

% increase - 64%

3. 40% Bronze Filled PTFE

April 2010 - US$14.95 per Kg (US$6.8 per pound)
April 2011 - US$ 24.55 per Kg (US$11.15 per pound)

% increase - 64%

In most cases - at first attempt - the customer simply refuses to believe that any increase in pricing could be so drastic. The fact that there is little or no published data online regarding this makes it even more difficult to convince them!

After speaking with many industry insiders, suppliers and processors, we are only able to slowly piece together the effects causing this dramatic surge in PTFE prices. In most cases, we are inclined to believe what these sources say - although a more thorough study of the actual economics driving the PTFE pricing may be required to truly quantify the degree to which each factor influences the eventual rate.

To start with, let's look at the changes globally:

1) Fluorspar

This is the most common reason that resin suppliers offer up as soon as anyone questions the price of PTFE. Its a bit of a black box - because PTFE processors have never really delved into the details of resin manufacture and suppliers in turn, remain secretive about the process - which suits them in times like this!

Fluorspar is a mineral which, apart from being a critical raw material input in PTFE resin manufacture, is also vital in the manufacture of refrigerants, steel and pharmaceuticals. We are told that China controls most of the global fluorspar reserves and that owing to higher realisations in areas other than PTFE, the availability of fluorspar for PTFE resin manufacture has been severely constrained. This supply-demand gap for fluorspar is set to have triggered off the initial price increases in PTFE.

I'm actually speaking with some fluorspar manufacturers later to gauge exactly how much impact this supply-demand gap may realistically have on the pricing. Will add more on that later.

2) Plant shutdowns

It is highly likely that some of these may be rumours, but we have heard that the largest resin manufacturer in China shut down their plant for maintenance. Following this, some of the larger manufacturers in Europe also had forced maintenance shut downs and more recently, the earthquake in Japan has forced their largest PTFE resin manufacturer to remain closed for the next few months. There are also rumours that DuPont may be coming out of the compression moulded resins business - putting further pressure on supplies. All in all - we are told that this has resulted in about 1000 tonnes of global shortage in PTFE resins.

3) Greed... and the 'what else' factor

One of my more honest suppliers of compounded resins (so virgin PTFE is a raw material for him as well) offered the only remaining explanation for the continuing increase in prices - "greed". Another manufacturer of PTFE micro-powders seconded this and also suggested the "what else" implication of all this.

To explain this better - we need to look at PTFE as a polymer among a huge family of fluoroplastics and thermoplastics. As we have struggled to cope with the price increase we have also looked for alternatives to offer our customers - sometimes at their request, sometimes in desperation to keep the customer from going elsewhere.

In truth, there are only 2 polymers which somewhat compare across properties with PTFE. The first is UHMWPE - which, like PTFE has excellent wear resistance, dielectric strength and a low coefficient of friction. However, its inability to withstand high temperatures restricts its use in many industrial applications (PTFE can withstand up to 250 Degrees Celsius, whereas UHMWPE can only withstand up to 80 Degrees Celsius). UHMWPE is much cheaper than PTFE (especially now!) - but is still viewed as a sort of 'poor cousin' and despite our efforts, customers are not nearly as satisfied with it as they are with PTFE.

The other polymer is PEEK (better known by its trade name - Victrex). PEEK is again comparable to PTFE on all metrics (exceeding PTFE on properties such as tensile strength and temperature resistance) except coefficient of friction. However, PEEK resin currently sells at over 5 times the price of PTFE resin - making any discussion on substitution for PTFE pointless.

There are other polymers which may match up to PTFE on at least one or two of it's properties - but all that we have looked at are still more expensive than PTFE - even after the price increase! (a more in depth look into the properties of PTFE and the comparable properties and price of substitutes will be dealt with in a separate piece)

In our own experience - many clients have (grudgingly) accepted the new pricing we have offered because - by their own admission - they have no alternative materials which would suit their application.

It is my belief that at some point in the last year, resin manufacturers realised that a material as versatile and irreplaceable as PTFE was not selling for as much as it should. While the initial hike in pricing was due to a fundamental shift in the demand-supply equation, the more recent bursts seem more likely due to pressure testing by resin manufacturers to see what level they can hold prices at in the long run.

In India there has been one extra factor which has influenced PTFE resin prices. In 2010 the local resin companies lobbied for an anti-dumping duty on all Chinese an Russian resins. The duty - which still stands - called for a flat charge of US$3.25 per Kg - which allowed the Indian resin manufacturers to raise their prices immediately from US$7.25 to US$10.5 per Kg. The continued rise beyond this price is explained by the global shifts which 'coincidentally' occurred within weeks of the duty being levied.

The question that we're being forced to ask now is "what next?" In truth, there is still no visibility on when the PTFE resin prices will stabilise - which means processors are living from one day to the next, trying to convince clients in the hope that any orders they secure will hopefully be executed before the prices increase again. It is a very sticky situation and if rumours are to be believed, it will only stabilise by the end of 2011.

In case you wish to know more about PTFE, do visit us on: www.polyfluoroltd.com